We know that a player would like to play guitar rather than fix it most of the time. But, if you want to increase the quality of your guitar for jam sessions, you must be aware of fixing your guitar. I know it is mostly guitar frets that cause trouble for the guitarist. Therefore, I am here to answer your query about how to fix a dead fret on electric guitar.
Sometimes, your guitars do not sound good for your practice. At this, knowing how to fix small problems in your guitar can help you prepare your guitar for better practice.
To tackle this question and give you an idea of the problems in your frets and how you can fix them on your own, I am going to write this detailed article.
If you are a beginner in the guitar industry, this article is of core importance to you.
So, read and understand this article carefully to have a complete idea about how to fix a dead fret on electric guitar.
Also Read: How To Tell If My Guitar Strings Are Dead?-What To Know?
How Do You Go For Fixing The Dead Frets:
if the problem is simply due to frets, anyone can fix them by pressing firmly on the frets. But, sometimes, the issue is not that simple to be fixed by just pressing the frets.
Frets get dead primarily due to a number of reasons, so having complete knowledge about the problems and their causes can help in fixing them more effectively.
Here are a few main causes of dead frets and solutions to how to fix a dead fret on electric guitar, so read them thoroughly to fulfill your query.
If You Find The Loose Frets:
A fret comes out of its slot and is not pressed firmly to put back into its position. Sometimes, a fret is not adjusted correctly, resulting in a loose fret.
This loose fret gets taller than its adjacent frets, resulting in no tone or simply buzzing sound.
Such frets are known to be loose or uneven frets. Loose frets are quite common in guitars but need good experience identifying them and fixing them.
How Do You Fix The loose frets:
In case of loose frets, a guitar player can fix this issue by simply removing that fret and then putting it in the correct position.
For knocking off the fret, put a towel on the frets, and then you can use a hammer (either plastic or brass hammer) to knock it gently on the frets.
If the fret gets back to its position, that would be great. But, even after knocking, the fret gets loose again; you can use glue to fix it to the right position.
For further satisfaction, use a roller to check whether the fret is equal in length to its neighbors or not.
Problem Of Uneven Fretboard:
As mentioned above, a fretboard gets loose when it is higher in length than others. The same is the case with fretboard; when a group of frets differs by in length with their surrounding frets, it is known to be an uneven fretboard of a guitar.
It gets worse over time if not fixed in time. One of the main reasons for the uneven group of frets is manufacturing guitars.
How To Fiz A Uneven Dead Fret On A Guitar:
Fixing uneven frets is not everyone’s cup of tea and is quite expensive.
So, if you do not want your guitar to get any damage, make sure to hire a professional guitar technician for the re-leveling of your guitar frets.
Yet, the method for re-leveling a guitar is not that difficult. You can fix it by simply decreasing the length of higher frets to normal frets.
For that, you can use a simple ruler to know the difference between the length of normal and higher frets.
Old And Worn-Out Guitar Strings:
If your guitar strings are old and worn out, you will not be able to practice your guitar properly as your strings will not tune correctly.
When you play the guitar, you pluck a string that creates vibrations. These vibrations produce sound in the guitar. The higher the vibrations, the greater the sound will be.
But in the case of old and worn-out strings, you’ll not be able to produce enough vibrations and sound.
Fixing Old Strings:
It is pretty simple to fix worn-out strings. You can either repair old strings by boiling them, but it is not a perfect solution as it will only improve your strings a little bit.
The best solution to it is by replacing old and worn-out strings with new ones.
The Neck Of The Guitar And How To Fix It?
The neck of the guitar also affects the frets over time. These include:
- Twisted guitar neck
- Excessively Bowed neck
When a guitar neck is curved sideways, it is warped. It is when one side of the neck is lower than the other side of the guitar.
While on the other hand, the angle of the guitar neck also plays a significant role in guitar frets.
How To Fix A Guitar Neck?
To fix the guitar angle, put a business card under the strings. If the card comes out without touching the strings but still has a gap, it means your guitar neck is not straight.
To fix that, you can adjust the truss rod within the neck of the guitar.
You cannot fix a warped neck. The more you try to fix it, the worse it will get. So, it will be better to acquire a professional technician.
In some cases, it is not possible to fix the neck, which results in replacing the guitar’s neck.
Also Read: How Often Should You Restring A Guitar?-Follow Easy Guide
In short, the frets of your guitar are the essential component of your guitar. If there is an issue with the fret, you’ll not be able to make the best use of your guitar. To point out dead frets, I have given a detailed explanation in this article. I hope you’ll not be able to ask anyone about how to fix a dead fret on electric guitar anymore.
I hope this information has proven helpful to you. If you like it, tell me in the comment section and let me know your essential queries.
Till then, take great care of yourself!
Read Other Articles: How To Tell If My Guitar Strings Are Dead?-What To Know? How Often Should You Restring A Guitar?-Follow Easy Guide How Much Is A Yamaha Guitar? | Know All About It! How to Play Verbatim on Guitar?-Easy Stepby Step Guide How Much Is A Fender Frontman 15g Amp Worth?|Need To Know!
Did You find Helpful This Post? Share with others